Ferrari 488 GTB detail
Posted by admin on April 21, 2016
This commission was to perform a full Zymol detail on this Ferrari 488 GTB.The car was initially rinsed down, and the arches, tyres , sills, and diffusers were degreased agitated and washed down. The road wheels were cleaned off on the faces and rears using a non acidic cleaner .Next was to complete a 5 stage hand wash and a wet detail to the badges , handles , vents etc.After final rinse the car was fired off using powerful hot air using the Venti Bi Motor.Once the car was completely dry we turned our attention to the interior.We began with an initial vacuum to the cabin and boot area.We then began to detail the detail using Studio 17 interior detail brushes, removing dust etc from all vents, panel joins etc.Next was to clean the interior glass surfaces , once this was completed we attend to the interior surfaces using a multipurpose cleaner to remove any marks etc.The next stage was to feed all of the leather surfaces using Zymol Treat leather conditioner.After polishing all carbon fibre components the interior was given a final vacuum.The engine bay was detailed to OEM finish, and all carbon fibre components were polished. The exterior detail began with a 2 stage clay bar process , this eliminates contaminants from the paintwork, exterior glass, and road wheels, once completed the surfaces were wiped down using IPA.After a paintwork inspection the paint surfaces , carbon fibre components , and road wheels were treated with Zymol HD Cleanse.Next we added 2 individual coats of Zymol Royale.After this we also added a profile wax.The exterior glass was cleaned down, the tyres and arches were dressed.The tailpipes were dressed, and an exterior detail carried out using a detail brush and Zymol detail spray.Finally the car was given a spritz coat of Field Glaze before client handover.