Mercedes Benz ML Detailing
Posted by admin on March 21, 2016
This commission was to perform a full detail on a Mercedes Benz ML. We began by rinsing down the entire car to remove dust and loose dirt etc. The underside , arches, tyres etc were degreased , this was rinsed down and repeated as required.We then turned our attention to the road wheels, these were cleaned faces and rears until to the standard required.We then perfumed a wet detail , using degreaser and a studio 17 wet detail brush on all of the badges, handles, shut lines etc.This was rinsed down prior to the bodywork receiving a 5 stage hand wash.Once completed the car was rinsed down , and given a hot air blow dry to eliminate all water from the car.The interior was then attended too. This involved removing all belongings, over carpets, trays etc.An initial vacuum was carried out along with a full air blow through to remove all dust etc from runners, vents etc, this was assisted with a studio 17 dusting brush.All of the interior surfaces were cleaned down, and all leather surfaces were fed. The interior surfaces comprising of finished plastic and aluminium were polished using Classique finishing spray. All the interior glass was cleaned down, and the interior belongings etc placed back into the car. The exterior was treated to a clay bar process to remove all surface contamination from the paintwork, glass, and road wheels.Once complete the paintwork was wiped down using IPA. After an inspection for any paint defects, we applied 2 coats of Classique wax.The exterior glass was cleaned down, tyres and arches were dressed.An exterior detail was carried out using a studio 17 fine detail brush and Classique finishing spray.The car was given a final coat of finishing spray prior to handover.