Maserati Quattroporte detail

Posted by admin on May 19, 2016

This recent commission was to perform a full detail on this Maserati Quattroporte.The car was rinsed down, and then degreaser applied to the tyres, arches, sills, and under the bumpers. This was rinsed and repeated until clean. The road wheels were cleaned faces and rears using a non acidic wheel cleaner and a studio 17 wheel brush .The engine and bay were degreased and cleaned prior to rinsing. Next the car was the treated to a multi stage hand wash and a wet detail wash using a studio 17 wet detailing brush.After final rinse the car was dried down and a Venti machine used to expell all water from the car.We then turned our attention to the interior. This was given a initial full vacuum, and then a blow through using air from the Venti The interior surfaces were all cleaned down using Parc Ferme cleaning products, and Studio 17 brushes,the leather was fed using Parc Ferme leather feed. The interior glass surfaces were cleaned down prior to the final vacuum. The engine and bay area were dressed to OEM finish, along with the tyres and wheel arches.The paintwork was given a clay bar treatment to remove all surface contamination prior to receiving the wax treatment. The wax used was Parc Ferme’s own branded wax and all of the exterior detail was performed using Parc Ferme finishing spray and a Studio 17 fine detail brush. Finally the tailpipes were cleaned and dressed , the exterior glass cleaned down , and the paintwork given a final coat of finishing glaze.

Leave a Reply