Ferrari 458 Speciale detailing

Posted by admin on May 19, 2016

This Ferrari 458 Speciale is in our regular care, and required a full detail on this occasion . Initially the car was rinsed down, the wheels , tyres , arches sill, and diffusers were degreased using Parc Ferme products.Once satisfied with the finish we turned our attention to the road wheels which were cleaned down faces and rears using a Parc Ferme non acidic wheel cleaner and used this with a Studio 17 soft wheel brush.Again once satisfied we then turned our attention to the bodywork , this received a multiple hand wash using Parc Ferme shampoo and wool mitts.After final rinse the car was dried down and the drying process was completed with a Venti hot air dryer. The next stage was to attend to the interior detailing process. We began with a full vacuum, and a blow through. We then began to clean all of the interior surfaces using Parc Ferme multi purpose cleaner and Studio 17 interior brushes etc. Once this process was complete we polished all of the interior carbon fibre components , and all interior glass surfaces .We then completed an engine and bay inspection and clean, this was carried out by hand and all rubber surfaces were cleaned and treated, and all carbon fibre components were polished, leaving the engine and bay to OEM finish.The bodywork then received a clay bar process to remove any surface contamination from paintwork, road wheels, and carbon fibre components.We then proceeded to carry out a full wax to the paint surfaces , wheels, and carbon fibre.Once completed the exterior was detailed using Parc Ferme finishing spray, and a studio 17 fine detail brush.The tyres and arches were dressed and the tailpipes cleaned.Finally the exterior glass was cleaned down and the car was given a final coating of Parc Ferme finishing glaze.

Leave a Reply