Porsche Cayman S detail

This commission was to perform a full Zymol Royale treatment this Porsche Cayman S.The car was initially rinsed down to remove all dust particles etc.The arches, tyres , sills and under the front and rear PU’s was degreased , agitated and rinsed down.The road wheels were cleaned down faces and rears until to our standard.All of the exterior badges, handles, panel joins, lights, spoiler, air intakes etc were degreased using a fine wet detail brush.We then performed a 5 stage hand wash pure wool wash mitts.After final rinse the car dried down using hot air from the Venti machine along with drying towels.The interior was cleared of all belongings , over carpets, rubber tray covers etc.We then brushed out all vents, switches etc using our Parc Ferme dusting brush, prior to an initial vacuum.We then blew the interior out using the Venti and carried out another vacuum.All interior surfaces were cleaned down, and 2 coats leather cream applied.The interior glass was cleaned before placing back all carpets, belongings etc.The exterior surfaces were given a 2 stage clay bar process, and wiped down with IPA prior to next stage.We then applied Zymol HD cleanse to the painted surfaces and road wheels.Next we applied 2 separate coats of Zymol Royale glaze to the paintwork, and road wheels.The exterior detail was carried out using detail spray and a Parc Ferme fine detailing brush.The exterior glass was cleaned down, tyres and arches dressed, and the tailpipes cleaned and dressed .Finally we gave the bodywork, and shut areas a coating of Zymol Field Glaze , along with giving the road wheels a coating of Zymol Wax Wheel Coat.

Tesla model X

This commission was to perform a full Zymol Royale treatment this Tesla model X.The car was initially rinsed down to remove all dust particles etc.The arches, tyres , sills and under the front and rear PU’s was degreased , agitated and rinsed down.The road wheels were cleaned down faces and rears until to our standard.All of the exterior badges, handles, panel joins etc were degreased using a fine wet detail brush.We then performed a 5 stage hand wash pure wool wash mitts.After final rinse the car dried down using powerful hot air from the Venti Bi Motor machine and drying towels.The interior was cleared of all belongings , over carpets etc.We then brushed out all vents, switches etc using our fine dusting brush, prior to an initial vacuum.We then blow the interior out using the Venti and carried out another vacuum.All interior surfaces were cleaned down, and a leather food applied.The interior glass was cleaned before placing back all carpets, belongings etc.The exterior surfaces were given a 2 stage clay bar process, and wiped down with IPA prior to next stage.We then applied Zymol HD cleanse to the painted surfaces and road wheels.Next we applied 2 separate coats of Zymol Royale glaze, the wax which retails at over £10,000 per container to the paintwork, and road wheels.The exterior detail was carried out using detail spray and a Parc Ferme fine detailing brush.The exterior glass was cleaned down, tyres and arches dressed.Finally we gave the bodywork, and shut areas a coating of Zymol Field Glaze , along with giving the road wheels a coating of Zymol Wax Wheel Coat.

Ferrari GTC4 Lusso

The commission was for a full detail on a Ferrari GTC 4 Lusso. The car was initially degreased on the tyres, arches ,sills, engine ,and under the front bumper and rear diffuser. Once this product had been agitated and rinsed down, we turned our attention to road wheels, these were cleaned using a non acidic wheel cleaner a Parc Ferme soft wheel brush on the faces and rears, rotating until fully clean.The exterior was then rinsed down prior to and exterior wet detail using our own washing detail brush on badges, panel joins, handles etc.Another rinse down before we carried out a multipole wash using Parc Ferme car wash, with soft wool mitts.After the final rinse the car was dried down using a Vents and microfibre towels.The next step was to perform an interior detail using Parc Ferme interior cleaner, detail brushes, and sponges. All of the interior surfaces were cleaned down, and the leather surfaces were separately cleaned with leather cleaner and fed with leather cream.The interior glass surfaces were cleaned down.We then turned our attention to the engine and bay area, this was cleaned, polished and dressed to OEM finish.The exterior was treated to a 2 stage clay bar process to remove all surface contamination.Once completed we inspected the paint surface for any defects, once we were happy to continue the paintwork, diffusers, and road wheels were wiped with IPA before received a coating of our Speed wax.The exterior glass was cleaned own, along with the tailpipes which were dressed along with the tyres and wheel arches.All exterior derail was performed using a Parc Ferme fine detailing brush and a detail spray.The car was then treated to a final coat our finishing spray including all shut areas, and all carbon fibre components

Porsche Cayenne detail

his commission was to perform a full detail on a Porsche Cayenne S.The car was initially rinsed down to remove dust etc.The tyres, arches, sills, etc were degreased , once this product had been agitated it was rinsed down.We then turned our attention to the wheels, faces and rears, using our soft wheel brushed and non acid wheel cleaner until they were to our standard.The exterior then had a 5 stage hand wash using natural wool mitts, and soft wet detail brushes for the badges, handles, panel joins etc.After the final rinse the car was dried down using powerful hot air from the Vents Bi Motor.The next stage was to empty the cabin and boot area of all belongings , over carpets, trays, rubber infill covers, tools etc.The interior was then treated to an initial vacuum.We then used our dusting brush too clear out all vents, switches etc before blowing the interior through with the Vents.Another vacuum was then carried out.All of the interior surfaces were then cleaned down by hand using our multi purpose cleaner,sponges and brushes.The leather was cleaned and fed using our leather feed.All interior glass surfaces were cleaned down, and any brushed aluminium components were polished with our finishing spray.After a final vacuum all of the belongings etc were replaced .The exterior received a 2 stage clay bar treatment to remove any surfaces contamination on the paint surface, glass, carbon fibre components, and road wheels.The paintwork was then wiped down with IPA prior to being coated with Parc Ferme Speed Wax.The glass was cleaned down, and the tyres, arches and tailpipes dressed.The wheels received a coating of our wheel protective spray, and the paintwork received an exterior detail using our fine detailing brakes and our detailing spray.Finally we applied a coat of our finishing spray prior to handover.

Maserati Gan Turismo detail

This commission was to perform a full detail on a Maserati Gran Turismo.The car was initially rinsed down to remove dust etc.The tyres, arches, sills, etc were degreased , once this product had been agitated it was rinsed down.We then cleaned the wheels, faces and rears, using our soft wheel brushed and non acid wheel cleaner until they were to our standard.The exterior then had a 5 stage hand wash using natural wool mitts, and soft wet detail brushes.After the final rinse the car was dried down using hot air from the Vents Bi Motor machine.The next stage was to empty the cabin and boot area of all belongings , over carpets, trays, rubber infill covers, tools etc.The interior was then treated to an initial vacuum.We then used our dusting brush too clear out all vents, switches etc before blowing the interior through with the Vents.Another vacuum was then carried out.All of the interior surfaces were then cleaned down by hand using our multi purpose cleaner,sponges and brushes.The leather was cleaned and fed using our leather feed.All interior glass surfaces were cleaned down, and any carbon fibre components were polished with our finishing spray.After a final vacuum all of the belongings etc were replaced .The exterior received a 2 stage clay bar treatment to remove any surfaces contamination on the paint surface, glass, carbon fibre components, and road wheels.The paintwork was then wiped down with IPA prior to being coated with Parc Ferme Speed Wax.The glass was cleaned down, and the tyres, arches and tailpipes dressed.The wheels received a coating of our wheel protective spray, and the paintwork received a final coat of our finishing spray prior to handover.

Mercedes E63 AMG Detail

This commission was to perform a full detail with paint correction .Initially the car was rinsed own to remove dust etc.We began by performing an engine wash using degreaser and our engine detail brushes.Once this was completed we degreased the tyres, arches, sill, etc, and agin once rinsed down we turned our attention the road wheels.These were cleaned down faces and rears using our wheel cleaner and our soft alloy wheel brushes.Once these stages were completed the exterior was given a wet detail using degreaser on the badges, panel joins etc along with a multi stage hand wash using wool mitts.After the final rinse down the car was completely dried down using the Venti hot air blow dryer.We began by removing all belongings,matts,rubber pads,etc before giving the car a full vacuum.Next we used our dust brush to remove all dusts from vents, switches etc.We then blow air through the cabin area, and carried out another vacuum.All of the interior surfaces were cleaned down using our multi-purpose cleaner, sponge, and brushes.All of the leather surfaces were fed using Parc Ferme leather food.Finally we cleaned all interior glass surfaces , and replaced all matts etc.The exterior was then treated to a clay bar treatment to remove all surface contamination including the exterior glass and road wheels.The paintwork was then wiped down using IPA prior to being masked up.We performed 3 stage paint correction using Scholl compounds of varying grades and foam pads of varying grades.Deeper scratches were located and wet sanded out using varying grades of wet sand material.after un-masking the paintwork was wiped down with IPA prior to waxing.The wax used was Parc Ferme Speed wax to enhance and protect the corrected paint surface.The tyres and arches were dressed along with the tailpipes, and the engine and bay were dressed to OEM finish.The exterior glass was cleaned down, and all exterior detail was performed using Parc Ferme detail spray and a fine detail brush.Finally of the seals were dressed and the wheels were given a coat of Parc Ferme wheel protectant, along with a coat of our finishing spray.

detailing training school

We would like to congratulate Tom on completing his detailer training at our training Academy.Tom passed with flying colours all both practical and theory sections of the course.We wish him luck with his new venture and remain on hand to advise in the future.All of our detailing training courses are operated on a one to one basis for maximum effect and allowing more time to be spent with each student.The course is for 1 week and is operated on 1 car only for the duration of the training, to cover every aspect of automotive detailing.Please feel free to contact us at clientsupport@parcferme.co.uk for an information pack.

Porsche Boxster RS60 Spyder detail

This commission was for a full detail and a Zymol Royale top up.The car was rinsed down and degreaser was added to the tyres, arches, sills, and under the PU’s.Once rinsed down we began to clean the road wheels , faces and rears using Parc Ferme wheel cleaner and soft wheel brushes.Once to our standard we performed a wet detail the exterior using degreaser and a wet detail brush on all badges, handles, panel joins etc.After rinsing the car down again , we began to clean the convertible hood using Parc Ferme cleaner and our hood brush.After rinsing this down we performed a 5 stage hand wash .After the final rinse the car was blown dry with powerful hot air.We began the detail by attending to the interior first.All belongings, mats etc were removed prior to an initial vacuum.Next we brushed out all vents, switches etc before blowing the cabin through with air.Another vacuum was then carried out.All of the interior surfaces were cleaned down using Parc Ferme multi-purpose cleaner, interior sponges and brushes.The leather was treated to 2 coats of Zymol Leather food.To complete the interior the glass surfaces were cleaned down along with a final vacuum and all belongings etc returned to the car.The exterior received 2 coats of Zymol Royale and all exterior detail was performed using detail spray and a detail brush.The next stage was to dress the tyres and arches, along with cleaning and polishing the tailpipes.The exterior glass was cleaned down and any fluff etc removed from the hood.the road wheels were treated with wheel protector, and the bodywork was given a spritz of Zymol Field Glaze prior to handover.

Bentley Continental detail

This commission was to perform full paint correction to this Bentley Continental Fixed Head.The car had already been washed and dried prior to our arrival.We began by performing a full inspection of the paintwork prior to starting any work.After inspection it was established that the paintwork required a 2 stage clay bar process to all painted surfaces.Once completed the car was wiped down using IPA.After masking up the appropriate areas we began the paint surface correction process.This particular process involved 3 stages of paint correction using 3 varying grades of compounds and 3 varying grades of foam pads.Once completed we assessed the paintwork , marked ares of concern and carried out an additional wet sanding process using 2 grades of wet sand material.After a full wipe down with IPA and a final inspection, the paintwork was given a final stage of paint correction provide a uniform colour and add gloss to the finish.We then applied Zymol HD Cleanse to the paintwork.The next step was to add 2 individual coats of Zymol Royale.All of the exterior detail was performed using Parc Ferme fine detailing brushes with detail spray.Finally the paintwork, wheel caps and brightwork were given a coat of Zymol Field Glaze prior to handover.